ERNAD DIGITAL PURE  SINE WAVE HOME U P S

Introduction

This system works on Digital Signal Processing (DSP) technology to produce pure sine wave outputs. Absolutely COOL & SILENT working!!

This equipment is very robust in design & construction, which will not fail, in any extreme conditions. It has fold-back current limiting for short circuit and heavy loads. At short circuit or heavy loads, current limiting action will take place instead of tripping, which will increase system reliability. Pure Sine wave enables easy motor starting. As such fractional HP motor can be used, subject to capacity restrictions. High speed switching between mains & inverter modes makes it suitable to use with computers and computer aided loads.

�Features LED display for indicating various status of the system like mains status, charger status, inverter status, overload/short circuit status, battery low status etc. Delayed inverter cutoff for conditions like battery low, overload, short circuit etc. The system will automatically restart from cutoff after a few buzzer beeps. The system will be permanently shutoff if the error condition exists even after 4 restart attempts. Protections against: Overload, short circuit, battery deep discharge, battery over charge, mains over voltage, reverse connection of phase in – phase out, reverse connection of phase and neutral of mains input. 

Salient features:

lCapacities available: 750VA/1000VA 12V& 2000VA 24V/3000VA36V&5000VA 48V

lOut put voltage 230V +/- 3%

lBattery charging: Fuzzy Logic

lCharging current: Settable unto 15A

lFrequency: 50Hz Pure Sine wave

lCharger off DC 14.4V

lCharger On DC 13V

lFan cooling while temperature exceeds the limit

For details: ernadcak@gmail.com  Mobile:91 97478 21243

Phone/Fax: +91 4862 224379

TRADE ENQUIRIES SOLICITED ON ATTRACTIVE TERMS

===============================================================